Configuring MG Stack
Introduction
You can configure the following MG Stack settings for mammography studies in the MG Near-Match settings tab:
Path
User Settings > Reading Protocols > MG Near-Match > MG Stack
Steps
- Modify the following settings as needed.
- When you have finished configuring all settings, click Close to apply and save setting changes.
MG Stack Match Priority
|
Setting |
Description |
|---|---|
|
Make Series-stacking protocols higher priority than Same-series protocols |
If enabled, Synapse determines the reading protocol priority for MG stacking. This setting is enabled by default. |
MG Stack Near-Match
|
Setting |
Description |
|---|---|
|
Enable stack near-match |
If enabled, Synapse activates additional MG Stack Near-Match options. This setting is enabled by default. |
|
Current Study Near-Match Boundaries |
|
|
Maximum number of empty protocol stacks |
Use this setting to specify the maximum number of MG stacks defined in a reading protocol that can be empty for the current study. If applicable, select a different number from the drop-down list of 1 through 6. The default setting is 3. |
|
Maximum number of extra series stacks |
Use this setting to specify the maximum number of MG stacks that Synapse would not display by a reading protocol for a current study. If applicable, select a different number from the drop-down list of 1 through 6. The default setting is 3. |
Prior Studies Near-Match Boundaries
|
Setting |
Description |
|---|---|
|
Maximum number (scaled) of empty protocols stacks |
Use this setting to specify the maximum number of the empty protocol stacks displayed for prior studies. If applicable, select a different number from the drop-down list of 1 through 6. The default setting is 6. |
|
Maximum number of (scaled) of extra series stacks |
Use this setting to specify the maximum number of extra study stacks displayed for prior studies. If applicable, select a different number from the drop-down list of 1 through 6. The default setting is 6. |
MG Stack 'All Priors' Sort
|
Setting |
Description |
|---|---|
|
Stack studies in acquired order, most recent to oldest |
If enabled, Synapse displays the newest study first and the oldest study last in the stack. This setting is enabled by default. |
|
Stack studies in acquired order, oldest to most recent |
If enabled, Synapse displays the oldest study first and the newest study last in the stack. |
Results
Synapse automatically saves any updated options and displays the following message in the bottom left corner of the window: Successfully saved.
Synapse displays the following message that you must take the following action to apply the settings: Refresh the Synapse browser window for settings to apply.